Services
Studies you can defend. Engineering you can build from.
Power-system studies and electrical engineering for the system you operate, expand, or build. We also offer MEP design and construction support.
Category
01 / 03Power System Studies
Comprehensive analytical studies to ensure your electrical systems are safe, reliable, and code-compliant.
Arc Flash Hazard Analysis
NFPA 70E-compliant studies with IEEE 1584-2018 calculations.
Short-Circuit Studies
Fault current analysis and equipment rating verification.
Coordination Studies
Time-current curve analysis for protective device sequencing.
Harmonic Analysis
Power quality studies for facilities with VFDs and non-linear loads.
Load Flow Analysis
Steady-state power flow studies for voltage regulation.
Duct Bank Heat Studies
Cable ampacity calculations using CYMCAP software.
Category
02 / 03MEP Engineering & Design
Mechanical, electrical, and plumbing design with coordinated models, equipment schedules, and construction documents for your project.
MEP Engineering
Coordinated mechanical, electrical, and plumbing design from concept through construction.
Mechanical & HVAC Design
HVAC loads, ventilation, equipment selection, and industrial process utilities.
Electrical Design
Building power, lighting, distribution, and equipment connections.
Plumbing & Process Piping
Water, sanitary, gas, compressed air, and process piping systems.
Revit & BIM Coordination
MEP models, clash detection, and coordinated design documentation.
Emergency Power Systems
Generator design and EPSS/ESS engineering.
EV & Renewable Infrastructure
EV charging, solar PV, and battery storage projects.
Data Center & Mission-Critical
Power analysis and redundancy modeling for high-availability sites.
Temporary & Construction Power
Construction site and disaster-recovery power systems.
Category
03 / 03Construction Support
Field-ready engineering support bridging design and construction phases.
Need scope help?